Blue Origin has officially unveiled a third stage for its New Glenn rocket and introduced a new booster engine, marking a significant expansion of the launch vehicle's capabilities into high-energy orbits and deep space. The announcements, made by Chief Executive Dave Limp, include the GS3 stage designed for direct geostationary orbit (GEO) injection and Earth-escape trajectories, alongside the Northstar engine, a liquid oxygen and liquefied natural gas (LOX/LNG) booster rated at 715,000 pounds of thrust.
What Happened
The GS3 third stage is engineered to handle missions that the current two-stage New Glenn architecture cannot efficiently support. On the standard 7x2 vehicle, GS3 enables up to 8 metric tonnes to GEO and 10 metric tonnes to trans-lunar injection (TLI). For the larger 9x4 variant, these capacity figures increase to 14 metric tonnes to GEO and 20 metric tonnes to TLI. The stage is powered by the BE-7 engine, which has a vacuum specific impulse exceeding 460 seconds, and integrates within the existing interstage to preserve full fairing volume. Blue Origin confirmed that GS3 is already under contract for a cis-lunar mission with an unnamed government customer, scheduled for launch in 2028.
In a parallel development, Blue Origin introduced the Northstar engine, its second booster engine alongside the BE-4. Northstar produces 715,000 pounds of thrust, an increase from BE-4's 640,000 pounds. The company claims Northstar achieves a 30 percent reduction in mass and a 50 percent cut in parts count compared to its predecessor. More than 65 percent of the engine is produced through additive manufacturing, and final assembly time has been reduced to less than a day. The program moved from approval to development testing in just 11 months.
Why It Matters
For the commercial launch sector, these updates position New Glenn as a more versatile competitor for national security and deep space missions. The addition of GS3 allows Blue Origin to offer direct GEO insertion and precise orbital maneuvers without relying on spacecraft propulsion for orbit raising, a capability critical for high-value communications and reconnaissance payloads. The GS3 stage has already undergone rigorous testing at Launch Site One in Texas, where a composite liquid hydrogen tank was pressurized to 100 percent of Maximum Expected Operating Pressure (MEOP) for 2.5 hours and to 150 percent MEOP for 10 minutes. Blue Origin expects this to be the first composite LH2 tank flown in space, potentially setting a new standard for lightweight stage construction.
The introduction of Northstar signals Blue Origin's intent to deepen its American-made propulsion supply chain. By creating an engine with significantly fewer parts and lower mass, the company aims to improve manufacturing efficiency and reliability for future New Glenn variants. This expansion comes as Blue Origin prepares to return to flight with the NG-4.1 mission in early 2027, following the loss of the NG-4 vehicle in a pad explosion in May. The company is also advancing plans for a second launch pad, LC-36B, to support an increasing launch cadence.
The Bottom Line
Blue Origin has expanded New Glenn's performance envelope with the GS3 third stage and Northstar engine, targeting direct GEO and deep space missions with enhanced payload capacity and manufacturing efficiency. The GS3 stage is contracted for a 2028 government mission, while Northstar offers a lighter, more powerful alternative to the BE-4, supporting the company's broader push for higher launch rates and new infrastructure at Cape Canaveral.